Disconnecting The Unit From Your Computer - Sony MSAC-US20 Mode D'emploi

Disconnecting the unit from your
computer
– For customers using Windows Me/Windows 2000/Windows XP –
Perform the procedure described below before disconnecting the USB
cable from the computer.
Customers using Windows 98SE do not need to perform this procedure.
1
Click the "Unplug or Eject Hardware" icon in the task tray in
the lower right corner of the screen.
2
Click "Safely remove Sony Memory Stick USB Reader/Writer
(MSAC-US20)-Drive (F:)".
* The drive letter "(F:)", etc. differs with the computer used.
3
["Sony Memory Stick USB Reader/Writer (MSAC-US20) can be
safely removed."] is displayed.
In this condition, you can safely remove this unit from your computer.
PNote
The indications may be different depending on the OS that you are using.
PNotes
• When you just want to remove the "Memory Stick" from this unit, the
procedure described above is not required.
• Do not remove the "Memory Stick" from this unit while the access lamp is
blinking. Data on the "Memory Stick" could be corrupted.
• When you carry out this operation, this unit is not recognized by your
camputer. To make this unit recognize again, disconnect the USB cable from
your computer and connect the USB cable to your computer again.
9-GB