Charge The Batteries; Select Your Language - USRobotics 9631 Guide D'installation Rapide

the batteries are charged, you must register the handset to the base sta-
tion and select the country in which you will use the handset.

Charge the Batteries

The batteries must be charged for 14 hours before you use the handset
for the first time. Use only the batteries that came with the handset.
1. Connect the charger adapter to an electrical outlet.
2. Remove the battery compartment cover by sliding it toward the bot-
tom of the handset.
3. Insert the batteries, observing their polarities, into the battery com-
partment and replace the cover.
4. Set the handset in the charger and let the batteries charge for 14
hours.
5. The handset may become warm during initial charging.
Turn On the Handset
Turn on the handset by pressing
! If the handset displays the handset name and number, the installa-
tion process is complete and you can start using your handset.
! If the handset displays a scrolling welcome message, continue with
the next step in the installation process, "Select Your Language".

Select Your Language

When you turn on the handset for the first time, you must set the lan-
guage by selecting your country. Be sure to select the same country that
you selected on the handset that came with the base station. If the coun-
try settings do not match, you will not be able to register the handset to
the base station.
1. Wait for the welcome message to stop scrolling.
The handset begins its country selection mode.
until text appears on the screen.
EXIT
English
3