Operating Your No Peek Waffle Maker - Calphalon No Peek HE400WM Mode D'emploi

Operating Your No Peek Waffle Maker
TM
Setting The Controls
Step 1: Choose the desired shade setting. Turn the
control knob clockwise to the desired level of browning – light,
medium or dark.
Step 2: Allow the No Peek Waffle Maker to
TM
preheat. As the waffle maker preheats, the lights between
"Off" and your chosen setting will gradually illuminate. Once
the light next to your chosen setting illuminates, the No Peek
Waffle Maker chime will sound, indicating that it is ready to
cook waffles.
Step 3: Add batter to the no peek waffle maker.
Open the No Peek Waffle Maker and pour approximately 2
cups of waffle batter evenly over the bottom plate. Use a tem-
perature resistant nylon or wood utensil to spread the batter
evenly over the bottom plate. Close the No Peek Waffle Maker.
NOTE: The premium bronze nonstick finish of your Calphalon
No Peek Waffle Maker means that you do not need to grease
TM
the waffle plates – not even the first time you use it.
WARNING
WHEN POURING BATTER OR REMOVING WAFFLES FROM
THE WAFFLE MAKER, PREVENT THE WAFFLE MAKER FROM
ACCIDENTALLY CLOSING BY HOLDING THE HANDLE FOR
THE UPPER WAFFLE PLATE WITH AN OVEN MITT.
As the waffles cook, the No Peek lights gradually illuminate
to your selected level of browning – from "Light" to "Medium"
to "Dark". As the lights appear, you'll track the progress of your
waffles cooking, and know when they are done – without
peeking inside.
8