This will open up the following screen:
You will find a list of channels down the left-hand side.
These can be scrolled through, using the up and down arrows above and below the list.
Clicking on any of the channels will change which channel you are currently viewing (highlighted in green,
with programmes highlighted in blue). In the top left-hand corner, you will see the date.
This can also be changed, using the accompanying arrows. To the top of the main section,
you will see the time.
Again, this can be scrolled through, using the arrows.
Note that some channels may not offer the EPG function.
TROUBLESHOOTING GUIDE
Problem
No picture
No sound
Cannot tune stations
Picture performance is poor
Error message appears
when starting software, saying
"Please plug in the tuner".
The DVB-T tuner
is heating while operating
EN-9
Possible Reason
Currently viewing radio
station
Mute mode is activated
Volume level is set too low
Poor signal
Wrong country is chosen in Setup Choose the correct country in Setup
Not using latest version of
Direct X
Computer hardware does
not meet minimum requirements
Too many programs are
being used at the same time
Poor signal
Laptop computer is using
battery power
Tuner is not plugged in
Electronic parts of this tuner
are reasonably heating
Solution
No picture will appear on
radio channels
Click on the speaker icon
beside the volume indicator
to restore the sound
Increase volume
Move the antenna for better
reception
Download latest version of
Direct X
Upgrade hardware to meet
minimum requirements
Close unnecessary programs
Move the antenna for better
reception
Try plugging the laptop into
its power supply
Plug in tuner, or if
necessary, disconnect and
then reconnect.
this doesn't affect your PC ;
heat stabilizes automatically
after 15 minutes