Télécharger Imprimer la page

ADT SiXFOB2A Guide D'installation Rapide page 2

Publicité

Status Indications / Indications
Press and release any key for system status. / Appuyez et relâchez l'un ou l'autre des boutons pour connaitre sont état
G
R
/
G
G
20 sec
G
3 sec
R 2-3 sec
R
2-3 sec
G
2-3 sec
G
2-3 sec
G
1 x
G
2 sec
R = Red / Rouge
=
Slow Flash / Clignote lentement
G = Green / Verte
=
On / Allumée
Product must be tested at least once each year
Specifications
Battery: ............................................................................................Maxell CR2032, Duracell DL2032
RF Frequency: ......................................................................................................................... 2.4GHz
Operating Temperature: ................................................. 32° -122° F (Agency Compliance 32° -120° F)
Relative Humidity: ................................. 95% max., non-condensing (Agency Compliance 93% max.)
Dimensions: ...........................................................................................0.43" H x 2.195" L x 1.42" W
For Technical Support,
call 1-877-748-7628, option 3
For documentation, call Customer Service at:
1-800-238-2727 (1-800-ADT-ASAP).
IMPORTANT SECURITY NOTICE
Please inform the User about the security importance of their wireless key (key fob), and what to do if it is lost.
Explain that the key fob is similar to their keys or access card. If lost or stolen, another person can
compromise their security system. They should immediately notify the Dealer/Installer of a lost or stolen key
fob. The Dealer/Installer will then remove the key fob programming from the security system.
REFER TO THE INSTALLATION INSTRUCTIONS FOR THE CONTROL WITH WHICH THIS
DEVICE IS USED, FOR DETAILS REGARDING LIMITATIONS OF THE ENTIRE ALARM SYSTEM.
The product should not be disposed of with other household waste. Check for the nearest authorized collection centers or authorized
recyclers. The correct disposal of end-of-life equipment will help prevent potential negative consequences for the environment and
human health.
This product is manufactured by Resideo and its affiliates. The Honeywell Home Trademark is used under license from Honeywell
International Inc.
Status / État du système / Estado del sistema / Status do sistema
Device Enrollment
Enrôlement du dispositive
System is Armed
2 x
Le système est armé
Alarm in progress or System in Audible Panic Mode
4 x
Alarme en cours ou système en mode d'urgence audible
Disarmed, Ready to Arm
1 x
Désarmé – Prêt à armer
Disarmed, Not Ready to Arm
Désarmé – Pas prêt à armer
RF Transmission
Transmission Rf
Not Hearing From the Control Panel
1 sec
Pas entendu par le panneau
Deleting Keyfob from the system
Suppression du système de la télécommande
Rapid Flash / Clignote rapidement
=
R
Sounder / Avertisseur sonore
/
=
LEDs Alternate / Les DELs commutent
FEDERAL COMMUNICATIONS COMMISSION (FCC) & INDUSTRY CANADA (IC)
STATEMENTS
The user shall not make any changes or modifications to the equipment unless authorized by the
Installation Instructions or User's Manual. Unauthorized changes or modifications could void the
user's authority to operate the equipment.
CLASS B DIGITAL DEVICE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
as defined by FCC Rules Part 15.105. The Class B Digital Device statement can be viewed at:
https://customer.resideo.com/en-US/support/residential/codes-and-
standards/FCC15105/Pages/default.aspx
FCC / IC STATEMENT
This device complies with Part 15 of the FCC Rules, and Industry Canada's license-exempt
RSSs. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
Cet appareil est conforme à la partie 15 des règles de la FCC et exempt de licence RSS
d'Industrie Canada. Son fonctionnement est soumis aux conditions suivantes: (1) Cet appareil
ne doit pas causer d'interférences nuisibles. (2) Cet appareil doit accepter toute interférence
reçue y compris les interférences causant une réception indésirable.
Responsible Party / Issuer of Supplier's Declaration of Conformity: Ademco Inc., a subsidiary of
Resideo Technologies, Inc., 2 Corporate Center Drive., Melville, NY 11747, Ph: 516-577-2000
RF EXPOSURE / MISE EN GARDE EXPOSITION AUX FREQUENCES RADIO
Warning – The antenna(s) used for this device must not be co-located or operating in
conjunction with any other antenna or transmitter except in accordance with FCC multi-
transmitter product procedures.
Attention – L'antenne (s) utilisé pour cet appareil ne doit pas être co-localisées ou opérant
conjointement avec une autre antenne ou émetteur non conformant avec les procédures FCC
poules produits à multi-transmetteurs.
Approval Listings / Approbations Homologations
FCC / IC
ETL Listed to: UL 985, UL 1023 &UL 1635
= Beep / Bip
= Chirp / Pépiement
cETLus Listed to: ULC ORD- C1023 & ULC-S545
Other Standards: C-Tick , SIA CP-01 & RoHS
Le fonctionnement du produit doit être vérifié au moins une fois par année
Spécifications
Pile: .......................................................................................
Fréquence RF: ......................................................................................................................... 2.4GH
Température de fonctionnement: ....................................... 0° -50° C (Agency Compliance 0° – 49° C
Humidité relative: ................................... 95% max. non-condensing (Agency Compliance 93% max
Dimensions: ................................................................................. 11 mm H x 55.7 mm L x 36 mm W
Pour la documentation, appelez le service clientèle au
AVIS DE SÉCURITÉ IMPORTANT
Veuillez aviser l'utilisateur à propos de l'importance de sa clé sans fil (télécommande) et quoi faire en
cas de perte.
Expliquez-lui que sa télécommande a la même valeur que ses clés ou sa carte d'accès. Si la
télécommande est perdue ou volée, une autre personne peut neutraliser le fonctionnement du système
de sécurité. Il doit donc immédiatement avertir son détaillant ou son installateur. Le
détaillant/l'installateur pourra ensuite rendre inopérante la télécommande dans le système de sécurité
POUR LES LIMITES DU SYSTÈME D'ALARME AU COMPLET, REPORTEZ-VOUS AU
GUIDE D'INSTALLATION DU PANNEAU DE COMMANDE.
Ce produit ne doit pas être jeté avec les ordures ménagères. Recherchez les centres de collecte ou de recyclage autorisés les
plus près de chez vous. L'élimination adéquate d'équipement en fin de vie permet d'éviter les conséquences néfastes sur
l'environnement et sur la santé humaine.
Ce produit est fabriqué par Resideo Technologies et ses filiale.
International inc.
Maxell CR2032, Duracell DL203
Pour le support technique,
appelez 1-877-748-7628, option 3.
1-800-238-2727 (1-800-ADT-ASAP).
La Honeywell Home est une marque de commerce de Honeywell
.

Publicité

loading