Konig Computer CMP-NBSTAND30 Mode D'emploi page 2

Instructions:
1. Fold the notebook riser open, put the bar into desired slot.
2. Open the laptop support.
3. Open the document support (below the laptop support).
4. Place the laptop properly onto the laptop support and adjust the screen to the
appropriate eye level.
5. Low angle is for direct use of the notebook with its own keyboard.
6. The high angle is recommended when using an external keyboard and/or mouse
combo.
7. Put your documents on the document support to work in an ergonomic and effi cient
way.
Use the supplied USB cable to connect the USB2.0 hub to your notebook. The fan has
its own USB cable, you can use an available port of the HUB to power it.
2