Table des Matières
Publicité
Troubleshooting
1. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu does not
appear automatically. What should I do?
1. For Windows 7, if the installation menu does not appear automatically, click on the Windows Icon on the
bottom left hand corner of the screen, click the "Search programs and files" box, and type D:\autorun.exe,
where "D" in "D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the ENTER key
on your keyboard .
2. For Windows Vista, if the installation menu does not appear automatically, click Start, click the Start Search
box, and type D:\autorun.exe where "D" in "D:\autorun.exe" is the letter assigned to your CD-ROM Drive,
and then press the ENTER key on your keyboard.
3. For Windows XP, if the window does not appear automatically, click Start, click Run and type
D:\autorun.exe where "D" in "D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press
the ENTER key on your keyboard.
2. IP Setup is unable to detect my camera. What should I do?
1. Verify that you have followed all the steps in Section 2: Hardware Installation.
2. Disable any software firewall programs such as ZoneAlarm or Norton Internet Security. If you are using
Windows 7, Vista or XP disable the built in firewall.
3. Click on Search in IPSetup.
4. Reset the IP Camera:
a. Remove the cover on the front of the
TV-IP322P
b. Take a pen and press the Reset button
for 10 seconds, then let go.
3. I do not have a DHCP server or DHCP is disabled on my network and I am unable to configure the
TV-IP322P. What should I do?
1. Go to the TCP/IP settings on your computer and assign a static IP address on your computer's network
adapter in the subnet of 192.168.10.x. Since the default IP address of the TV-IP322P is 192.168.10.30,
do not assign a static IP address of 192.168.10.30 on your computer's network adapter.
2. Open Internet Explorer and enter http://192.168.10.30 into the address bar.
4.
The Image is blurry. How can I adjust the focus on the IP Camera?
Remove the cover on the front of the TV-IP322P. You can adjust the Internet Camera's focus by rotating the
lens.
5. When I click on Live View the image does not load?
1. Make sure that you are using a browser that supports ActiveX.
2. Make sure that ActiveX is installed. See steps 10 to 11 in Section 2: Hardware Installation
6. I forgot my password. What should I do?
1. Reset the IP Camera. This will return settings back to factory defaults.
a. Remove the cover on the front of the TV-IP322P
b. Take a paper click and press the Reset button for 10 seconds, then let go.
2. Open up the IP Setup program to find out the IP address of the camera (see step 8 in Section 3: Configure
the IP Camera. If you do not have a DHCP server on your network, the default IP address is 192.168.10.30.
The default administrator ID and password is admin.
If you still encounter problems or have any questions regarding the TV-IP322P, please contact TRENDnet's
Technical Support Department.
9
Publicité
Table des Matières
