Bluetooth Function - danew GPS GS281 Guide De L'utilisateur

Bluetooth Function

The Bluetooth function is used for communication purpose. After the
device is connected to a mobile phone with Bluetooth capability, you
can operate the mobile phone functions on this system. He can dial or
receive a call, view the
call record of the mobile
phone or perform other
functions. Click the
Bluetooth icon on the
main interface and
enter the following
interface:
Enabling Bluetooth Function
In the first use of the Bluetooth function, you will see the interface shown
above. Only Bluetooth Setting is available. Other functions are all
unavailable in the
gray-out state. At this
time, enable the
Bluetooth function. Click
Bluetooth Setting to
enter the setting
interface, as shown
in the following diagram:
Hands-free volume control
Select by ticking the check box ahead of the Enable Bluetooth Function
to enable the function. The return to the upper-level menu please click
on this icon :
At this time, as the mobile phone is not connected, other mobile phone
functions are unavailable.
Function & Operation
Dial
Redial
10
Pair Setting Call Register