Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Description
1. Lid
2. Lid button
3. Switch button
4. Base
Before first use
Before first use, it is recommended to operate the kettle for 2 or 3
times following the instructions below , this will remove any dust or
residues remaining from the manufacturing process.
•
Take up the kettle from the base before filling.
•
To fill the kettle, open the cover by pressing the lid button
downwards , then fill to the desired level (min0. 75L-Max.1.7L),
close the lid by pressing it down until it clicks into place.
•
Plug the power supply cord into the main, press the ON/OFF
switch, the power indicator lights up.
•
When the water has boiled the kettle will automatically switch
itself off, you can stop the boiling process at any time by lifting
the On/Off switch. The power indicator will go out.
•
You can see clearly the water temperature on the thermometer.
So you can use the water to make tea, coffee maker or other
things at your desire temperature.
GB-5
1
2
3
4
Publicité
Table des Matières
