Velleman VR-GEAR3 Mode D'emploi page 3

4. Features
 suitable for 3.5" to 6" screen smartphones
 the small screen of your smartphone becomes a large theatre
 almost no "screen" concept after wear
 supports side by side video (left-right) 3D
 luxury head strap for stable image
 both eyepieces can be adjusted separately
5. Operation
5.1 Installing Your Smartphone
1. Slide the holder out of the 3D viewer.
2. Orientate your smartphone: turn your smartphone and hold its upper
part to the left.
3. Install your smartphone in the holder. Use the included adhesive pads
if necessary.
4. Switch on your smartphone, select your 3D image and slide the holder
with smartphone back in the viewer.
5. Put on the 3D viewer. Adjust the head strap so it sits firmly onto your head.
6. Adjust the eye distance of the lenses and the focus.
V. 01 – 24/06/2016
VR-GEAR3
3 ©Velleman nv