Setting The Temperature Control - Avintage AV7XK Notice D'utilisation

Power
To turn this appliance on/off, press the bottom
the audible alarm when the alarm is on.
LIGHT
To control the inner light turn on/off.
« UP »
Used to increase (warm) the set temperature by 1°C/1°F.
« DOWN »
Used to decrease (cool) the set temperature by 1°C/1°F.
SELECTOR
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from Fahrenheit to
Celsius or from Celsius to Fahrenheit, press the button

SETTING THE TEMPERATURE CONTROL

•
You can set the temperature as required by pressing the « UP » or « DOWN » button. When you press the two buttons
for the fist time, the LED readout will show the original temperature set previously (the temperature preset at the factory
is 12°C/54°F).
•
The temperature will increase 1°C/1°F if you press the button « UP » once. The temperature will decrease 1°C/1°F if
you press the button « DOWN » once.
•
To view the « set » temperature at any time, press the « UP » or « DOWN » button, the "set" temperature will
temporarily "flash" in the LED display for 5 seconds.
•
The internal storage temperature will appear in the temperature display window.
MODEL 2 ZONES
Power
To turn this appliance on/off, press the bottom
the audible alarm when the alarm is on.
LIGHT
To control the inner light turn on/off.
« UP »
Used to increase (warm) the set temperature by 1°C/1°F.
« DOWN »
Used to decrease (cool) the set temperature by 1°C/1°F.
and hold for 5 seconds. Pressing the
for 5 seconds
and hold for 5 seconds. Pressing the
key once can switch off
key once can switch off
32