Publicité
Les langues disponibles
Les langues disponibles
Safety Information and Precautions
1.
The NAS can operate normally in the temperature of 0 – 40 °C/32 – 104 °F and relative humidity of
– 95 %. Please make sure the environment is well-ventilated.
2.
The power cord and devices connected to the NAS must provide correct supply voltage (90
W, 100 – 240 V AC, 50/60 Hz).
3.
Do not place the NAS in direct sunlight or near chemicals. Make sure the temperature and humidity of
the environment are in optimized level.
4.
Unplug the power cord and all the connected cables before cleaning. Wipe the NAS with a dry towel. Do
not use chemical or aerosol to clean the NAS.
5.
Do not place any objects on the NAS during normal system operations and to avoid overheat.
6.
Use the flat head screws in the product package to lock the hard disk drives in the NAS when installing
the hard drives for proper operation.
7.
Do not place the NAS near any liquid.
8.
Do not place the NAS on any uneven surface to avoid falling off and damage.
9.
Make sure the voltage is correct in your location when using the NAS. If unsure, please contact the dis-
tributor or the local power supply company.
10.
Do not place any object on the power cord.
11.
Do not attempt to repair the NAS in any occasions. Improper disassembly of the product may expose
you to electric shock or other risks. For any enquiries, please contact the distributor.
12.
The chassis (also known as rack mount) NAS models should only be installed in the server room and
maintained by the authorized server manager or IT administrator. The server room is locked by key or
keycard access and only certified staff is allowed to enter the server room.
Warning:
•
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
recom- mended by the manufacturer. Dispose of used batteries according to the manufacturer's
instructions.
•
Do NOT touch the fan inside the system to avoid serious injuries.
0
Publicité
