Disposal; Troubleshooting; Specifications - Heidolph HB 4000 digit Mode D'emploi

E
For disposal, please comply with your local or national regulations.
Split by metal, plastic, etc.
Packing material to be treated as described above (material split).
No heat:
a) check power cord
b) power switch (1b) broken (call service engineer)
c) max. temperature limiter dropped (refer to Chapter 31.1)
d) hot bath heater broken (call service engineer)
e) Error code Er3 displayed: you are heating your hot bath dry ! Disconnect push button (2a),
check whether temperature limiter dropped, reset if required, fill heating bath with fluid.
f) Error code Er1 and Er2 displayed: heating bath inspection by a service engineer authorized by
Heidolph is mandatory.
heating power
temperature range, hot bath
accuracy, hot bath
bath temperature display
heating bath temperature control
material, hot bath
heating bath diameter
power supply
dissipated power
weight, glassware not included
size (wxdxh),
power cord
protective class
ambient conditions

DISPOSAL

TROUBLESHOOTING

SPECIFICATIONS

230V/50/60Hz oder 115V/50/60Hz
18
1300 W
20-180°C
±1 K
digital
electronic
V4A (1.4404)
240 mm
1300 W
3,7 kg
270 x 270 x 175 mm
2 m
IP 20
0-40°C
at 80% rel. humidity