Additional Setup - Fiilex MATRIXII RGBW Guide De Démarrage Rapide

Additional Setup

Mounting Power Adapter to Super Clamp
Loosen
1. Loosen the lock knob on the
Super Clamp.
Connect AC Power Adapter to AC Cable
Pull
-Pull back release clip before joining connectors.
Rotate connectors clockwise to secure connection.
-To disconnect, pull back release clip and rotate
connectors counterclockwise.
2. Hold down the release button and
slide the Super Clamp onto the
Power Adapter mounting pin.
AC Cable (Plug head may vary depends
on the region of EU, UK, AU, ZA , CH)
lock
unlock
Hold
Slide
(For regions outside of the U.S)
320W / 48V Power Adapter
6
3. Tighten the lock knob
on the Super Clamp.
4. Use clamp adjustment knob
to affix Super Clamp and
Power Adapter to light stand.
XLR 3-Pin Connector (DC out)