Functions - Geberit ESG 3 Manuel D'utilisation

EN

Functions

The Geberit electrofusion machine ESG 3 is equipped with
overvoltage protection, which protects the machine against
overvoltage damage.
When operating with 230 volts mains supply voltage
With the Geberit electrofusion machine ESG 3 and a supply voltage
of 230 volts, it is possible to weld all Geberit electrofusion
couplings and Geberit electrofusion tapes for anchor point.
Replacing the sleeve connection cable on the remote control also
makes it possible to weld all Geberit electrofusion couplings with
integrated thermal fuse.
The Geberit electrofusion machine ESG 3 also makes possible the
serial welding of up to three Geberit electrofusion couplings or
Geberit electrofusion tapes. The possible dimensions can be found
in the table on the back cover page.
When operating with 115 volts mains supply voltage
With a supply voltage of 115 volts, it is possible to weld all Geberit
electrofusion couplings and Geberit electrofusion tapes for anchor
point.
The Geberit electrofusion machine ESG 3 also makes possible the
serial welding of up to three Geberit electrofusion couplings or
Geberit electrofusion tapes. The possible dimensions can be found
in the table on the back cover page.
When operating with a power generator
When operating with a power generator, the Geberit electrofusion
machine ESG 3 has the same functions as with mains operation.
The power generator must have an output of at least 2.5 kilowatts.
32
B1158-002 © 07-2016
966.473.00.0 (02)