Weidmüller MCP Basic 2 Mode D'emploi page 22

3 Transport and installation site
► Unpack the delivery and check everything is there.
The delivery includes the following components:
– MCP Basic 2 plotter with MCP AP BASIC mounting
plate and three MCP EP adjuster plates
– Mains plug with connection cable and a fitted Euro
adapter
– Adapter for US and UK mains plug
– 0.25 plotter pen
– USB cable
– M-Print PRO software on DVD
®
Keep the packaging so you can transport
the device safely if it needs servicing.
3.1 Setting up the plotter
The installation site must meet the following criteria:
– A dry room, as free of dust as possible
– For environmental conditions, see Chapter 9.
– No exposure to direct sunlight
– Power socket nearby
– Stable, flat base
– Plenty of space so the connections are accessible
at all times and the movable writing arm is not
impeded when in use.
≥ 600 mm
Fig. 3.1 Space required for MCP Basic 2 plotter
22
1168680000/02/12.2016