Production Description And Function; Technical Data - Villeroy & Boch Emotion Control Mode D'emploi

1

Production description and function

The Emotion Control is designed especially for use in bathrooms. The Emotion Control is a 4-channel controller
which can be used to control up to three light channels. The fourth channel is reserved for controlling the
mirror heater. The mirror heater is located in the middle of the mirror's base plate, allowing the heat to radiate
out to all sides. Once it is switched on, the misted mirror clears.
1.1 Summary
1 Switches all the lights on at once
2 Switches all the lights off at once
3 Buttons 1 to 3 switch the individual
lights on and off
4 Switches the mirror heating on (automatic
switch-off after 30 minutes)
5 Setting warm white
6 Setting cold white
7 Signal LED

1.2 Technical data

Nominal voltage
Battery
Incorrect polarity protection
Interface output
Reaction time
Power consumption in standby
Ambient operating temperature
Humidity
Radio range
Dimensions (mm)
www.villeroy-boch.com // V 1.0 // 21.02.2017 // Emotion Control DE/EN/FR/NL/RU DE/EN/FR/NL/RU
1
2
3
4
5
6
3 V +/- 20 % DCV
Voltage spike protection: No
CR 2032 3V
Mechanical: yes
Electrical: no
Serial protocol, remote control 2.4 GHz
typically 100 ms
typically 0.5 μA
0 - 50 °C
max. 95% non-condensing
typically 15 m indoors
39,8 x 114,9 x 9,7
1
2
3
4
7
9