i-WATTS I-SP1T-10SMD750 Traduction Des Instructions D'origine page 9

GB
Thank you for purchasing a quality device. These instructions describe the proper use to ensure a long
life of your lamp working I-WATTS Please carefully read and understand these instructions before
DOMAIN OF USAGE
Outdoor or indoor usage such as jobsite, garden, studio and workshop.
WARNING
Never attempt to change wire connection way as this has been fixed professionally.
The lighting fixture shall be fixed on stand vertically that the longitudinal axis does not
slant than ±4°from the ground plate.
Disconnect the plug (all-poles) from the network when the front glass is open, and
follow the instructions to the next step
Do not put the lamp any closer than 1 m to any object.
Replace before using the shielding glass if it is damaged.
If the external flexible cable or cord of this luminary is damaged, it shall be
exclusively replaced by the manufacturer or his service agent or a similar qualified
person in order to avoid a hazard.
ASSEMBLING LAMP ON TRIPOD
First loosen the wing-nut screw on the tripod (A) and flex the tripod legs. Make sure
the tripod stands stable and retighten the wing-nut.
Now twist pole screws(B) left to open and extend to your required height. twist right
to lock the pole so it doesn't slide down.
Unscrew the middle wing-nut screw(C) and set up the lamp on the top of the pole.
Lock the lamp with the wing-nut through the central hole of the support frame onto
the tripod. Twist it tightly.
LED PROJECTOR ON TELESCOPIC LEG
installation and use. Retain instructions for future reference.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
Denotes risk of personal injury or damage to the tool.
In accordance with essential applicable safety standards of European
Replace any cracked protective shield
Do not install the lamp within 0.5 meter of any object.
Read this manual and general safety instructions
carefully before using the appliance, for your own safety.
Your power tool should only be passed on together with
Read manual before use
directives
WARNING!
these instructions.