Table des Matières
Publicité
pendingipaddress = 10.134.178.170
pendingipdiscovery = dhcp
pendingipgateway = 10.134.178.1
pendingipnetmask = 255.255.255.0
pendingvlan_id = (none)
state = enabled
vlan_id = (none)
Commands:
cd
set
show
3.
Configurez les paramètres réseau statiques sur le processeur de service
(facultatif).
->
set pendingipaddress=10.134.178.170
Set 'pendingipaddress' to '10.134.178.170'
set pendingipnetmask=255.255.255.0
->
Set 'pendingipnetmask' to '255.255.255.0'
->
set pendingipgateway=10.134.178.1
Set 'pendingipgateway' to '10.134.178.1'
set pendingipdiscovery=static
->
Set 'pendingipdiscovery' to 'static'
set commitpending=true
->
Set 'commitpending' to 'true'
show
->
/SP/network
Targets:
ipv6
test
Properties:
commitpending = (Cannot show property)
dhcp_clientid = none
dhcp_server_ip = none
ipaddress = 10.134.178.170
ipdiscovery = static <---------
ipgateway = 10.134.178.1
ipnetmask = 255.255.255.0
macaddress = 00:21:28:79:8B:58
pendingipaddress = 10.134.178.170
pendingipdiscovery = static
pendingipgateway = 10.134.178.1
pendingipnetmask = 255.255.255.0
pendingvlan_id = (none)
state = enabled
vlan_id = (none
4.
Définissez le processeur de service hostname.
Configuration de la gestion réseau sur le processeur de service
Administration du commutateur
15
Publicité
Table des Matières
