Listening To Audio - Audio-Technica ATH-DSR9BT Manuel De L'utilisateur

Using the product

Listening to audio

• To connect for the first time, pair the product and your device by using either the Bluetooth wireless technology or
NFC. If you have already paired the product and your Bluetooth device, turn on the product and turn on your device's
Bluetooth connection.
• Use your Bluetooth device to start playback, referring to the device's user manual as necessary.
You can perform the following operations using the product.
Tap controller
Tap (1 short press)
Double-tap (2 short presses)
Long tap (1 long press,
lasting about 4 seconds)
Volume controller
*1 Some controls may not be available for music and video playback on some smartphones.
*2 A beep is heard each time you slide the volume control. A low beep is heard when the volume is at the maximum or minimum level.
• The volume control of some devices may not work well together with the product.
9
ATH-DSR9BT_Manual_Book.indb 9
Plays or pauses music and video playback.*
Displays battery level. The indicator lamps light the same way as when the power is
turned on.(p.8)
Depending on the connected device, activates the device's speech recognition feature
(such as Siri for compatible iOS devices).
Short slide
Long slide (about 2 seconds)
Short slide
Long slide (about 2 seconds)
1
Increases the volume by 1 level.*
Plays the next track.*
1
Decreases the volume by 1 level.*
Plays the previous track.*
2
2
1
2016/11/01 17:42