Building The Forager - HAYGAIN FORAGER Manuel D'utilisation

How to Build The Haygain
Building The Haygain
(Optional)
Dry
sand*
6
Forager
®
Forager
®
click
1
Remove cap from the base and fill with
20kg/44lbs of kiln dried sand (optional).
Firmly push cap back into the base so that
it is secure, you should hear a click.
2
Fitting the side walls – insert one at a time,
angle the wall at 45 degrees and slot into
the hole, repeat with all 4 side walls.
3
Place metal ring around the outside of the
side walls and carefully drop it down to the
base of the walls.
© Haygain