Storage And Transport - Bosch c-Si M 48 Mode D'emploi

en

10 Storage and transport

The handling of modules requires great diligence. There-
fore, caution is required when unpacking, transporting
and temporarily storing these modules:
Important Notice!
„ Do not set the modules down forcefully on hard
ground or on the edges.
„ Avoid bending during transport or when unpacking.
„ Do not drop the modules.
„ Do not place any objects on the modules.
„ Do not handle the modules using sharp objects.
„ In the course of storage and transport, it must be
ensured that each solar module is sufficiently rein-
forced.
Bosch Solar Module c-Si M 48 I Bosch Solar Module c-Si M60 I Bosch Solar Module c-Si M60 S I Bosch Solar Module c-Si P60
„ The stacking of packaging units can cause damage to
the solar modules and must definitely be avoided!
„ The solar modules are to be secured against overtur-
ning!
„ Layer pads must be used between the individual solar
modules.
We recommend storing all solar modules in dry interior
rooms and in the original packaging until their final in-
stallation.
When setting the modules down or transporting them to
the immediate installation site (e. g. a roof), any damage
to the module is to be avoided.
The modules may not be grasped and transported on a
single frame component!
Installation guide last updated: 01.07.2011
Storage and transport | 23
Robert Bosch GmbH