Remote Control - Linea DOMO DO-8120 Mode D'emploi

Table des Matières

Publicité

DO-8120
time is 7,5 hours.
Press the "timer" button once. You'll see that the indication light above the marking
"0,5h" will light up. This means you're fan will now operate for half an hour.
If you press the "timer" button again. The light above "1h" will light up. So now the
fan will operate for 1 hour. Press it again and the lights above "0,5h" and "1h" will
light up. Now operation time is 1,5 hours. By keep on pressing the "timer" button you
can programm the timer up to 7,5 hours. Now the indication light above "0,5h", "1h",
"2h" and "4h" will light up. If you add these up you'll have total of 7,5 hours.
So by adding up the lighted indication lights you'll now to which time the timer is set.
E. Wind type
By pressing the "mode" button you can select the wind type. When you turn on the
unit it will always be in the standard wind mode.
- press mode button one time : M1 : natural wind
- press mode button two times : M2 : soft wind
- press mode button three times : back to standard wind.

REMOTE CONTROL

The knobs on the remote control are the same as on the unit and have also the same
function.
WIND DIRECTION
You can adjusted the wind direction horizontaly by turning the front grill in the direc-
tion you desire.
CLEANING
The front and rear grill of your fan can be cleaned by using a vacuum cleaner.
Clean the housing of the unit with a soft damp cloth. Don't use any agressive cleaners.
28

Publicité

Table des Matières
loading

Table des Matières