LEAD dynamic WCC Manuel D'utilisation page 7

ENGLISH
2
Installation
1 x
2.1 Switch your wall controller on.
Learn-Function 1
+
2.3.a Press one of the buttons 1-4 to assign the
luminaire to the respective zone and confirm by
swiping the colour wheel. Complete the entire
'learning' process within 15 seconds.
2.4 Your luminaire will flash once to confirm that it
has been assigned to the selected zone and can now
be controlled using your wall controller. Repeat the
'Learn' process if your luminaire does not flash.
LEAD ENERGY AG Am Stadtbad 37 45219 Essen-Kettwig
On
15 sec.
Subject to errors and amendments
2.2 Note the installation steps from the operating
manual for your LED DYNAMIC COLOR product from
LEAD DYNAMIC. Start the 'LEARN' function on your
LED DYNAMIC COLOR product. If it has a 'LEARN'
button, press the button and follow the instructions in
Section 2.3.a. Otherwise switch your product on and
continue with Section 2.3.b.
Learn-Function 2
15 sec.
2 x 1 x
2.3.b Press one of the keys 1-4 twice quickly within a
space of 2 seconds and then once for a longer period
to assign the luminaire to this zone. Complete the
entire 'learning' process within 15 seconds.
Information / Technical support: www.lead-energy.com