audiophony BT2i Guide De L'utilisateur page 9

English
► Specification
• Fashion design, very comfortable, high-quality audio equipped with a microphone
• Compatible with most Bluetooth ® phones, tablets and computers
®
• Bluetooth mode or audio jack 3.5mm input
• Bluetooth ® profiles supported: V2.1 EDR, A2DP, AVRCP, Hands-free communication
• Operating distance: 10 meters on average - Class 2 Bluetooth
• Battery Life: Up to 10 hours playback and 13 hours talk time on average
• Charging time : About 2 hours
• Battery : Rechargeable Lithium battery 3,7V 400mAh
• Recharge by the supplied cable on a 5V DC USB port
• Speaker : 40mm - 32 Ohms 20mW
• Output : 100dB max. according to EN50332-1:2000 standard
• Frequency response : 20 Hz-20kHz
• Weight : 150 g
► Troubleshooting
Trouble
Can not connect my headset to
the phone
Keys do not work
Playback stops suddenly
The headset turns off by itself
No sound
The sound is hashed
My contacts can not hear me
The sound does not come out
of my headphones, but only on
my smartphone
• Turn off the headset. Delete it from the list of Bluetooth
devices from your phone. Proceed once again pairing.
• Make sure your phone is compatible with Bluetooth
V1.1 or V1.2 or V2.0 or V2.1.
Make sure your phone is compatible with Bluetooth
A2DP, AVRCP and hands-free communication
• Make sure the battery is charged.
• Otherwise, connect your computer to your BT2i to the total
charge of the battery.
• Adjust the volume
• Make sure your Bluetooth
playback mode
Make sure you are in the area of signal range of your
®
Bluetooth transmitter (max 10m)
• Verify that the microphone port is not blocked to better
capture your words.
• Check the reception quality of the telephone network
Make sure you have paired your headset and it is selected as
the audio device on your smartphone
®
Solution
®
device is connected and in
®
®
profi les
® profi les
Page 9