Vonyx STWM Série Manuel D'instructions page 3

FRONT- AND BACKPANEL
1. Power switch
2. Power signal lamp
3. Channel A volume control (not available by 179.185 and 179.187)
4. Channel A signal lamp (not available by 179.185 and 179.187)
5. Channel B signal lamp
6. Channel B volume control
7. Channel A antenna
8. Channel B antenna
9. AF out
10. AF mixing out
Models:
179.178 : STWM712H VHF Microphone System 2 channel Headset microphone
179.180 : STWM712C VHF Microphone System 2 channel combi (handheld and bodypack)
179.183 : STWM712 VHF Microphone System 2 channel handheld microphone
179.185 : STWM711 VHF Microphone System 1 channel handheld microphone
179.187 : STWM711H VHF Microphone System 1 channel Headset
HANDHELD
1.
Power ON/OFF Switch.
2.
Low battery indicator: Red light glows when the power is low and change the
battery.
3.
Battery Cover: Open it to install the battery. remove batteries in case of long time
no use (prevent leakage).
4.
Grille: Protects the cartridge and help reducing the breath sounds and wind noise.
3