SEVERIN HM 3814 Mode D'emploi page 8

appliances must be carried out by qualifi ed
personnel, including the replacement
of the power cord. If repairs are needed,
please send the appliance to one of our
customer service
address can be found in the appendix to
this manual.
Before using for the fi rst time
Before the appliance is used for the fi rst time,
all attachments and accessory parts must be
cleaned as described in the section General
care and cleaning.
Short-term operation
Th e appliance is designed to process average
domestic quantities of food. When using
the speed levels 1 - 5, the unit should not
be operated continuously for more than 10
minutes. Switch off the appliance aft erwards
and allow the motor to cool down.
Switch settings - Overview
Th e appliance is equipped with a multistage
switch.
Th e following settings may be selected:
M Pulse setting
0 Th e appliance is switched off
1 very low speed
2 low speed
3 medium speed
4 medium high speed
5 high speed
Switch settings - Functions
– When mixing light and liquid mixtures or
when stirring in any ingredients, settings
1 and 2 should be used.
– For stirring and kneading, it is best to use
settings 3, 4 or 5.
– Pulse function
maximum speed.
For heavy dough mixtures, setting 5 must
be used.
Turbo function
Maximum speed may be obtained by pressing
departments.
M for brief operation at
down the turbo button, regardless of the
speed level selected.
Operation
Th e
General information
– Depending on the quantity of ingredients,
use a suffi ciently deep bowl.
– Any bowl, round container or glass is
suitable, provided it is scratch-proof and
the attachments can rotate freely inside.
– Fit the beater attachments or kneading
hooks into the drive opening of the
blender unit. Th e beater attachment or
kneading hook with the geared ring must
be fi tted into the smaller opening with the
star-shaped recess on the blender unit.
– Once the attachments are fi tted, take the
blender into your hand and position the
attachments inside the container fi lled with
the ingredients.
– Use your thumb to switch on the unit.
– Once processing is fi nished, or if you wish
to interrupt the operation, switch off fi rst
before lift ing the attachments out of the
mixture.
Beaters
For light and liquid mixtures such as crèmes,
mashed potatoes, egg white or cream, insert
one or both beaters into the openings on
the underside of the blender and push them
gently upwards until they lock into place.
Kneading hooks
For kneading dough, the kneading hooks
must be used.
Ejecting the attachments
Th e beaters or dough hooks are automatically
detached when the eject button is pressed.
Using the rotating blender bowl
– Push the locking button for the tilt arm
lightly down and pull the tilt arm all the
way back and up.
– Place the blender bowl onto the integrated
turntable base.
8