Furygan X KEVLAR Notice D'utilisation page 10

16
TABLE OF CONTENTS
> Packaging contents and
1
heater pack specifications
> Operating instructions:
2
- Charging the batteries
- Heating your gloves
- LED lights explained
> System updates
3
> The MyFury Connect app
4
> Looking after your gloves
5
The DuPont Oval Logo, DuPont
of affiliates of DuPont de Nemours, Inc. used under licence by Furygan.
Welcome to the user guide
for your Furygan:
- Heat Genesis ;
- Heat Jaya ;
- Heat X Kevlar ;
®
- Heat X Kevlar lady.
®
Thank you for placing your confi-
dence in our product. Please read
these instructions carefully to get
the most out of it.
and Kevlar are trademarks or registered trademarks
™ ®
PACKAGING CONTENTS AND HEATER PACK
1
SPECIFICATIONS
> One pair of heated Furygan gloves (power rating: 8W for each glove).
> One pair of rechargeable batteries (Li-ion Polymer 7.4 volt, 2200 mAh).
- Battery life
HEATING BATTERY
REQUESTED LIFE*
≃ 1h50
100%
≃ 2h20
70%
≃ 3h20
50%
≃ 25 days
Gloves switched off
- Size and weight of each battery
63.5x49x15.5 mm, 71 grams.
- Battery charge time (full charge, and new batteries) about 4 hours.
80% of the charge capacity (approx. 8V) is reached after 3 hours.
Note: the batteries are not delivered fully charged.
> A USB-A charging cable (length 145cm) with two outputs (jack type) to charge
both batteries simultaneously.
The autonomy of the
batteries varies according
FR
to the requested heating
po wer.
* Average autonomy observed
according to the recommended
EN
conditions of use. New batteries.
Initial battery charge at 100%.