General Description; Care And Maintenance - LD Systems DEFENDER Série Manuel D'utilisation

SERIES

GENERAL DESCRIPTION

Cable protectors are used to protect floor cables that are not permanently installed, for example at trade shows,
markets and in the event industry. Cable protectors are used to prevent people from tripping.
You have chosen the DEFENDER series and thus made the best choice when it comes to protecting your cables
and people. DEFENDER cable protectors are characterised by:
• DEKRA certified safety.
• patented with self-cleaning hinge (EU Patent No.: EP1366550).
• Development and production in Germany.
• Fire protection class B2 (also available as B1 - flame retardant according to DIN4102).
• stringent raw material and production controls.
• very stable, tear-resistant and 100% recyclable plastic.
• resistance to oil, acid and petrol.
• temperature resistance from -30°C to +60°C.
• a shore A hardness of 88 ± 4.
• a wide range of product variants with coordinated system elements.
• a wide range of uses, from construction sites to offices.

CARE AND MAINTENANCE

All cable protectors in the DEFENDER series are made of extremely sturdy, non-breakable plastic (polyurethane).
The protectors can be easily cleaned, even using a steam jet cleaner. In order to ensure trouble-free functioning,
however, the hinge area and the lid closure should always be kept clean; slightly lubricate hinges and closure on
a regular basis. For this, we recommend using a commercially available Teflon or silicone spray. Wipe off excess
lubricant after application to avoid any risk of slipping.
4