Parts Overview; Battery Installation - Bresser Junior MAXI Mode D'emploi

Parts overview

B
ON/OFF-BUTTON

Focus dial

Projection lens

Battery installation

A
Only adults should insert or replace the batteries.
1. Loosen the battery compartment screw with a small Phillips screw-
driver and carefully remove the cover.
2. Insert three AA batteries into the unit with polarity as indicated on
the battery compartment.
3. Close the battery compartment again.
Location and operation
B
1. Place the unit over the stand (6) on a flat and stable platform (e.g. a
table). The optimal projection distance is about 1.8 m to 2 m.
2. Press the On/Off button (1) once to turn on the projector light. Dim
or turn off the light in the room for the best visual experience.
Turn the focus knob to focus the image
C
Adjust the Focus dial (2) until the projected star field is in focus. The
image will blur if the distance is too near or too far.
Projection angle freely adjustable
D
You can freely adjust the projection angle of the projector on the stand
(6), to enable viewing on the ceiling or wall.
Rotate disc to change image
E

Discs (3 pieces)

Disc tray

Stand
EN
11