Assembling the rigid hose
Insert the handle of the flexible hose into one of the rigid tubes. If necessary, attach
the second rigid tube to the end of the first.
Assembling the accessories
The crevice nozzle allows to clean hard to reach places.
The "T-shaped" and round nozzles are for cleaning furniture, blinds, curtains, windows
and stairs.
The floor/carpet nozzle:press the button that adjusts the position of the bristles
"
"
towards the
mark to extend or toward the
depending on whether it is a ceramic, marble floor, etc. or a carpet, mat, etc.
The liquids brush is for vacuuming liquids.
The fur brush turbo is ideal for carpets, beds, couches, hard surfaces etc.
Warning: do not put fingers or other tools near the moving roller to try to stop the
rotation, always keep the moving roller away from your hair, clothing, gloves, etc ...
and above all from the electric cord.
The accessories can be mounted both on the hose handle or
on the rigid tubes. Insert the accessory on the handle or on
rigid tubes firmly all the way; to remove the accessories do
the opposite.
All the accessories can be attached to the base when not in
use.
Use
Before each use, ensure that the appliance is in good working order, and that the
power cord is not damaged: if the cord is damaged, it must be replaced by the
manufacturer or its service centre or by someone with a similar qualification in order
to prevent any risks.
•
Attach the most suitable vacuuming accessory.
•
After checking that assembly has been done correctly and that the switch is on
"
(off), unravel the power cord and insert the plug into the plug point.
•
Switch on the appliance by pressing the switch to the I
•
The air flow can be regulated in two ways:
electronically, turning the knob clockwise to the required max
position or
manually lowering or lifting the selector (23) on the handle of the
flexible tube.
•
When using the appliance, make sure that the flexible hose is not blocked, twisted
or tangled.
•
Check that the blow ring (24) is correctly positioned and blocked.
"━"
mark to retract them
"
(on) position.
18/52
"
0