Battery Compartment; Overview Of The Components - Clatronic AT 3605 Mode D'emploi

• Batteries must not be disposed of through household waste. Return spent batteries to
designated collection facilities or retailers.
1 Breathalyzer sensor
2 LCD-Clock
3 LCD-Alcohol Tester
4 MODE button (selecting different functions)
5 SET button (confirming an input)
6 POWER button (starting the breathalyzer)
7 ADJ button (setting button)

8 Battery Compartment

NOTE:
Once the indicators in the LCDs start flashing or fading, replace the batteries by two new
batteries of the same type. Always replace both batteries at the same time.
What you should keep in mind before a test
• Alcohol remains in the mouth for some while and must be degraded first.
• After your last alcoholic drink you have to wait for 20 minutes before measuring.
• Do not smoke and eat 20 minutes before measuring.
• Also do not take any cough candy or peppermint drops which could distort results.
• You can repeat the test to prove the result. But wait three minutes before taking the next
measurement!
• Do not use volatile substances like paints, solvents, pesticides etc.

Overview of the Components

Inserting of batteries
(Batteries are not included)
• Remove the battery cover on the backside of the device.
• For the alcohol tester, Insert 2 AAA • UM-4 • R03 batteries.
• Mind polarity! Instructions you can see on the device.
Handling
GB
35