On | Off Button; Menu Button - Adalit L-3000 Instructions D'utilisation

3 On | Off Button

First pulsation
The two LEDs on at the
same time which ena-
bles wide and spot light
simultaneously. At the
same time, the display
turns on indicating the
remaining burning time.
Second pulsation
Only the LED situated
on the flood optic is
on and the light gets a
greater opening angle.
Thanks to the spe-
cial design of the Led
Engine Technology the
walking area near to the
bearer of the torch gets
illuminated.
Longer pulsation
BOOSTER function
Keeping pushed for
two seconds, the LED
situated on the focused
optic gets on. All power
is gathered in one single
LED and the light beam
reaches the maximum
distance and penetra-
tion. To return to the
previous position, push
again On | Off.
1
2
2"
Longer pulsation
STROBE function
Five different strobe
modes. Keeping pushed
for four seconds On | Off
button, the LED situated
on the focused optic gets
on in strobe mode. Pres-
sing Menu button up to
five times you can select
the desired frequency.
The selected strobe
frequency will be stored.
To return to the previous
position, push again
On | Off button.
Third pulsation
The torch and the display
switch off.

4 Menu Button

Burning Time System
Longer pulsation
Pressing the button
"MENU" for 4 seconds
with the torch on, the
"Burning Time System"
gets activated which
allows the user to choose
the desired burning time
and the light intensity.
Meanwhile the display
flashes the user by pres-
sing the "menu" button
can choose between the
three different burning
times, 4, 6 and 8 at full
charge, adjusting the light
intensity level automa-
tically. Once the user
has chosen the desired
burning time, the display
will be flashing after 5
seconds.
4"
5
1
2
3