Module D'affichage - GoPro Display Mod Guide De L'utilisateur

Using Your Display Mod
Press the Power button on your Display Mod to turn it on and see the live view
from your camera.
Heads Up: Your Display Mod will turn itself off if it doesn't receive a signal from your
camera for more than 5 minutes.
SWITCHING SCREENS
Press the Power button when your Display Mod is on to switch back and forth
between your camera's screen and Display Mod screen.
Heads Up: Only one screen can be active at a time. Camera controls can only be
accessed with your camera's touch screen.
POWERING OFF
Press and hold the Power button for 4 seconds.
RESETTING YOUR DISPLAY MOD
Press and hold the Power button for 8 seconds.
WARNING: Display Mod
is not waterproof.

Module d'affichage

MANUEL DE L'UTILISATEUR