DFE DION F64 Instructions D'assemblage page 10

Instructions d'installation/ Installation instructions : F6413T937
Ensemble Adaptateur F64 / Adapter Kit F64 : DION
Step 7: Adjustment of guard support

Loosen the guard support (21) by loosening the corresponding bolts (22).

Adjust the position of the support to obtain a smooth engagement with the guard
and a good alignment with the frame.

Install the lock with #10 screws and nuts provided. Ensure the guard is well in place
when the lock is clamped.

Tighten all the guard support bolts.
Step 8: Installation of the driving chain

Install the chain (23).

Check the alignment of the tightener sprocket (24) and adjust the spacer positions as
required.

Bind the chain by pushing on the sprocket and tighten it. The chain should have a 6mm
(1/4") slack on the loose side.
22 janvier 2013