Trouble-Shooting - Pressalit Care SELECT R4950 Manuel D'utilisation Et D'entretien

Trouble-shooting

Symptom
The product will not
work, even though
the controls is used
correctly .
The product runs up
and down unevenly .
Contact Pressalit Care or your dealer if the problem cannot be remedied .
Do not attempt to repair the product yourself, as this will invalidate the
guarantee .
en
16
Cause
Fault in power supply .
The sliding brackets
are not properly
lubricated .
Action
Check that all wires and
plugs are intact and
correctly connected .
Contact Pressalit A/S or
your local dealer .
Oil the sliding brackets
as described under
"Maintenance" .