Installing The Modem Driver; Ttroubleshooting - Dynex DX-M102 Guide De L'utilisateur

Installing the modem driver

After your computer starts, you must install the driver. See the section
"Installing the modem driver" on page 3.
Installing the modem driver
(Windows Vista/Windows XP/Windows 2000)
Note: Your computer may differ slightly from these images.
To install the modem driver:
1 When your computer starts, the Found New Hardware Wizard
opens automatically (this may not appear on Vista systems;
continue to step 3).
2 Click Cancel.
3 Insert the DX-M102 CD into your CD or DVD drive. The Dynex PCI
Modem window opens automatically.
4 Click Install Driver.
5 The driver is installed.
6 Click OK, then EXIT to close the Dynex PCI Modem window.
Troubleshooting
For troubleshooting information, see your user guide located on the
Dynex CD.
To verify the installation is correct
1 Open the Windows Control Panel and double click the Phone and
Modem Options icon. You may need to switch to Classic View.
2 Click the Modems tab, then select Dynex DX-M102 SM56kb
Data Fax Modem and click Properties.
3 Click the Diagnostics tab.
4 Click Query Modem.
5 Within a few seconds a window will appear with the modem
responses to various AT commands issued to it. When this
happens, the modem software is properly installed and
functioning correctly.
3