Electrical Connection; Technical Data - Eurofred FZ W Série Mode D'emploi

UK

Electrical connection

The appliance is intended for connection
to alternating current. The required volt-
age (V) and frequency (Hz) are stated on
the nameplate inside the appliance. Power
must be connected via an independent wall
socket outlet.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or a similar qualified person in
order to avoid a hazard.

Technical data

This appliance complies with CE marking
regulations, directives and standards.
Low Voltage Directive 73/23/EEC.
EMC Directive 89/336/EEC.
8