Special Instructions - Dimas CLEAN F Manuel D'utilisation Et D'entretien

This symbol indicates that the machine is
in conformance with the applicable
European directive.

SPECIAL INSTRUCTIONS

Designed to ensure certain and reliable service under
conditions which conform with operating instructions,
the joints' cleaner is potentially dangerous for the
user due to deterioration hazards, regular onsite
controls are required.
is necessary to ensure :
• Perfect technical condition (use for the purpose
for which it is intended and taking into account
any risks, and correction of any malfunction
detrimental to safety).
• Competent personnel (qualifications, age,
training, education) who have studied the
manual in detail before starting work: any fault of
an electrical or other nature must be checked by
a competent person (electrician, maintenance
foreman, authorized dealer, etc).
• That the warnings and instructions marked on
the machine are followed (adequate personal
protection, correct use, general safety
instructions, etc).
• That no modification, transformation or addition
is detrimental to safety and that it is carried out
without prior authorization
manufacturer.
• Respect of the maintenance intervals and
periodical checks recommended.
• That only genuine spare parts are used for
repairs.
Instruction plate
MANUFACTURER
TYPE TYPE
WEIGHT
MASSE UTILE
MAXI TOOL Ø MAXI OUTIL
BORE Ø ALESAGE
SPEED
T/MN - RPM
NON RESPECT OF THIS WARNING CAN
RESULT IN DEATH OR SERIOUS
INJURY.
from
N° SERIE SERIAL
FABRICATION
ANNEE DE
FABRICATION YEAR
POWER
Kg PUISSANCE kW
PLAGE DE
mm V VOLTAGE
TENSION
mm FREQUENCE Hz FREQUENCY
INTENSITY
INT. UTIL. A
DO Carefully read and check that all
instructions are understood before using
the cleaner.
DO Always wear ear and/or eye protection,
and approved head and breathing
protection.
DO Always keep a safe distance from moving
parts.
DO Know how to stop the cleaner quickly in
the event of emergency.
DO Only use sponges recommended by the
manufacturert.
DO Take care, and adhere to instructions,
when loading the cleaner.
the
DO NOT Allow others to be present during start
up, fuelling, or doing cutting work.
DO NOT Use damaged equipment.
DO NOT Allow disk protection of less than 180
degrees.
DO NOT Leave the cleaner unsupervised when
the motor is running.
DO NOT Use the cleaner when under the
influence of drugs or alcohol.
DO
DO NOT
17