OBI Cirella 850606 Mode D'emploi D'origine page 18

850606_850607_850608_850609.book Seite 18 Dienstag, 27. Mai 2014 4:16 16
GB
Figure 1 – Page 3
– Measure the dimensions for the drill holes
for fixture.
– Mark the drill holes on the ceiling.
– Drill the holes and insert the dowels.
– Screw firmly to the wall/ceiling.
Figure 2 – Page 3
– Connect the power cable as shown.
Figure 3 – Page 3
– Mount the product as shown.
Inserting/changing the bulbs
DANGER
Risk of burning!
Bulb becomes hot when operated.
Before changing the bulb, allow to
cool.
CAREFUL
Product damages!
Do not touch the glass panel of the
bulb with your fingers. Fingerprints
burn themselves into the glass,
become visible and shorten the life
time of the bulb.
Figure 4 – Page 3
– Insert the bulb as shown.
– Change the bulb as shown.
Service
• Have your product repaired by a qualified
specialist only.
This will maintain the safety of your
product.
Troubleshooting and help
DANGER
Risk to life!
Unprofessional repairs may mean
that your product will no longer
operate safely. This endangers you
and your environment.
18
If you are unable to eliminate the fault
yourself, please directly contact an OBI store
in your area. Please remember that repairs
carried out by non-professionals will
invalidate your warranty claim and may
cause additional costs.
Maintenance
• Before carrying out any work on the
product, ensure that the unit has no
power.
• Check all screws regularly to ensure that
they sit tight. This will maintain the safety
of your product.
Cleaning
• Clean the product with a cloth lightly
moistened with clean water (if necessary
with a little washing up liquid added).
Wipe with a dry cloth.
• Do not use abrasive or sharp objects or
aggressive cleaning agents.
Storage and transportation
• Always store the product in a dry
location.
• Always store the product in a location
away from frost.
• When moving the product, protect from
damages.
Disposal
Disposal of product
Products with this symbol may not
be disposed of with the household
waste.
These electrical and electronic devices must
be disposed of separately.
Contact your community authorities for
information regarding the correct disposal of
the product.