AudioSonic CD-1589 Mode D'emploi page 7

SkIP -
Press and hold while playing until you find the point you want to play.
STOP
Press to stop all CD / MP3 operation.
PLAYBACK
• Open the CD door and place a CD / MP3 disc with the label up in the CD compartment.
• Close the CD door.
• Press the "FUNCTION" button to select "CD / MP3" mode.
• Focus search is performed if disc is inside. Playback will start automatically from
the first track.
• Adjust the "VOLUME" control to the desired level.
• Press the "PLAY / PAUSE" button when you want to stop playback temporarily.
• Press the "STOP" button when finished.
FOLDER SELECT
Press the "FOLDER +" or "FOLDER -" button to select folder. ( Folder select function
can only operate if disc store with at least 2 directories / files. )
CD / MP3 OPERATION
PROGRAM
Be sure to press the "STOP" button before use.
• For CD disc, press the "MEMORY" button, the display will show "00 P-01". For MP3
disc, press the "MEMORY" button, the display will show "F00 P-01".
• Select desired track by using the "SkIP +" or "SkIP -" button. ( For MP3, select
a desired album by pressing "FOLDER +" or "FOLDER -" button. And press
"MEMORY" button to confirm folder number. Too will appear to select desired track
by using the "SkIP +" or "SkIP -" button.)
• Press the "MEMORY" button again to confirm desired track into the program memory.
• Repeat step 2 and 3 to enter additional tracks into the program memory.
• When all the desired tracks have been programmed, press the "PLAY / PAUSE"
button to play the disc in the order you have programmed.
• Press the "STOP" button twice to terminate programmed playback.
REPEAT
Press the "REPEAT" key of remote control during playing CD / MP3 disc, each press
switches the repeat function as follows:
1. REPEAT 1
2. REPEAT ALBUM ( *MP3 ONLY )
3. REPEAT ALL
4. NORMAL PLAYBACk
IPOD DOCK
GENERAL OPERATION
PLAY / PAUSE
Press to start playing tracks from the iPod.
Press again to stop playing iPod operation temporarily.
Press again to resume playback.
SkIP +
Press to go to the next track or back to the previous track.
SkIP -
Press and hold while playing until you find the point you want to play.
STOP
Press to stop all iPod operation.
PLAYBACK
• Press the "FUNCTION" button to select "IPOD" mode.
• When iPod is docked, the system will initialize the communication with iPod.
• Power On command is sent to the iPod to wake up it.
• Play command is sent afterward to auto play the iPod.
• Corresponding command is sent to iPod when key is pressed.
• Playback starts automatically. You can select available features (such as paly/pause,
skip track, fast forward/backward, menu selection) during playback.
EN
Instruction Manual
7