patura 148420 Mode D'emploi page 7

Align the screws in the centre of the
solar panel. Please note the drill hole
spacing on the aluminum mounting
bracket.
Mounting to carry boxes
Align the mounting bracket antered on
the top front of the box, mark the drill
holes and drill 2 x 6.5 mm holes.
Mounting to vandal-proof boxes
Align the mounting bracket antered on
the top front of the box, mark the drill
holes and drill 2 x 6.5 mm holes.
Mounting and connection to vandal-proof boxes and carry boxes
Guide the solar panel connecting cable
through the large cable support sleeve
on the side of the vandal­proof box.
Picture of 15 W panel: Screw the top
part of the solar panel mounting bra­
cket to the solar panel.
Screw the mounting bracket to the vandal­
proof box (screw M6x35, spacer sleeve,
support plate, self­locking nut M6)
Screw the mounting bracket to the vandal­
proof box (screw M6x35, spacer sleeve,
support plate, self­locking nut M6)
Guide the connecting cable through the
back opening of the open carry box to
the battery.
- 7 -
Picture of 25 W panel: Screw the top
part of the solar panel mounting bra­
cket to the solar panel.
Mount the pre­assembled solar panel to
the vandal­proof box.
Mount the pre­assembled solar panel to
the vandal­proof box.
Insert the cable socket of the red cable
in the free plug position of the red
battery clip. The black cable should be
connected to the black battery clip as
described above.