König Electronic KN-CP50 Mode D'emploi page 2

The device is based on the technology of an electronic bearing
sensor with functions like bearing, direction, digital clock , digital
thermometer and digital calendar.
The digital compass is designed for outdoor use. The detachable
string makes the digital compass a perfect hand-carry device for
various outdoor activities.
4
Calibration
1. Once batteries are replaced, the display will show the 'CAL' icon, it
means the calibration mode is active.
2. Place the digital compass on a flat surface with the screen
pointing upwards. Press the compass button, it will show a wrong
direction degree on the LCD, then press and hold the compass
button for 4 seconds, the display will show 'CAL' again, at this
time, turn the device one full circle slowly(or place the digital
compass on your hand and turn your body one full circle). This
allows the electronic bearing sensor to seek the magnetic North.
(Note: For more accurate results, the air bubble in the spirit level
should be kept inside the circle during the calibration procedure.)
3. After turning the device one full circle, press the compass button,
it will accurately show the direction degree.
Temperature Display Mode
Temperature display degree Celsius (°C) and degree Fahrenheit (°F)
systems.
Once batteries are inserted, degree Celsius (°C) system is
used. Press [ADJUST] button, degree Celsius(°C) and degree
Fahrenheit(°F) are inter-changeable.
Degree Celsius (°C)
system
ENGLISH
1. Liquid Crystal
1
2. Function buttons
3. Spirit level
4. Detachable string
2
Batteries compartment
Hold 2 "AAA" batteries
3
Press ADJUST button
2
Display
Degree Fahrenheit (°F)
system