BH SHIATSU LUXURY CLASS PRINCE RELEX CONCEPT M400 Instructions De Montage Et Utilisation page 22

PAUSE.- Pause.
Pause control key.
When the chair is in massage mode the user can press this key to pause the massage function.
The light on the massage PAUSE key will light up.
You can now use the Recline, Raise, Lift / Lower legrest keys. Press the PAUSE button again to
resume the massage session.
● AUTOMATIC PROGRAM.-
There are three automatic programs. You can choose the desired program by pressing the
corresponding button. The duration of the programs is 15 minutes although you can interrupt
the program by pressing the same key again or by using the
- RELAX.
-
THERAPY.
-
AIR.
When the program reaches the final minute it will advise you by beeping.
You can adjust the intensity of each program by using the INTENSITY key, following the
sequence "mode 2, mode 3, mode 1".
Note: It is not possible to combine all three programs.
● BACK MASSAGE PROGRAMS.-
KNEADING.- Manual back massage.
Press the START/STOP key.
Press the KNEADING key once to activate the massage function for the whole back, press it
again if you wish to stop it.
You can adjust the intensity of the massage by pressing the INTENSITY key, there are 3
intensity levels for the massage function.
TAPPING.- Tapping.
Press the START/STOP key.
Press the TAPPING key once to activate the massage function, press it again if you wish to
stop it.
The width and intensity of the tapping massage can be adjusted by pressing the WIDTH and
INTENSITY buttons.
DUAL-ACTION.- Dual action.
Press the START/STOP key.
Press the DUAL-ACTION key once to activate the massage function, press it again if you wish
to stop it.
You can adjust the intensity of the massage by pressing the INTENSITY key, there are 3
intensity levels for this massage function.
key.
21
M400