Using The Appliance; Cleaning - Profi Care PC-LBS 3002 Mode D'emploi

• In order to change an attachment, switch off the appliance. " I " appears on the
switch. Press the release button on the front of the appliance and pull the attach-
ment off upwards. Place the desired attachment on the drive mechanism until it
snaps on.
1. Turn on the appliance.
Middle position: Low speed
Top position: High speed
2. Turn off the appliance after use.
WARNING:
• Turn off the appliance and disconnect
the power adapter from the mains supply
when cleaning.
• Do not immerse the appliance and the
power adapter into the water.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• The shaving foil of the lady shaver may not be cleaned with the brush.
• Always switch off the appliance before cleaning.
Attachments
Clean the attachments in a mild soap solution. Rinse them with water afterwards. Let
the attachments dry completely before you put them back on.
60
PC-LBS3002_IM

Using the Appliance

Cleaning

12.09.17