Emplacements Des Étiquettes Importantes - California Air Tools 1610A Manuel Du Propriétaire

EMPLACEMENTS dES
ETIQuETTES IMPORTANTES
Lisez ces étiquettes importantes avant l'utilisation.
Ces étiquettes fournissent d'importantes informations de sécurité
et des informations pour maintenance'entretien. Ces étiquettes
doivent être considérées comme des éléments permanents du
compresseur d'air. Si l'une de ces étiquettes devient illisible,
endommagée ou disparait, veuillez contacter le service à la
clientèle de California Air Tools au 1-866-409-4581 pour un
remplacement.
D
B
H
4620A / 4610A / 4610
modèle:
6
A
E
F
C
G
A
B
c
D
E
f
g
1. The air compressor should only be placed in a well-ventilated and clean area.
2. Keep the air compressor on a firm and flat surface, with adequate space surrounding it for
3. If the air compressor needs repair or becomes damaged, turn off the power and drain the
4. Motors cannot be more than 10% lower or higher than the standard voltage.
5. When the compressor is running, do not touch its hot surfaces.
1. Always listen for unusual sounds, vibrations or high-pitched noises.
h
2. Open the drain valves to empty the air tank at least once per day.
1. Clean the air filter weekly. Replace it with a new one after 500 hours of use.
2. Open the safety valve to ensure that it is operational.
3. Ensure that the pressure switch and check valve are operating normally.
4. Inspect all screws and connections, and tighten if any are loose.
1. Inspect all screws and connections, and tighten if any are loose.
2. Clean the compressor's exterior, and check for leaky connections.
3. Check the valve plate, valve, piston rings, etc., to ensure that they are operating normally.
1-866-409-4581
COMPRESSEUR
Note:
ventilation.
tank.
Routine maintenance
Weekly maintenance
Quarterly maintenance