Main Functions - AgfaPhoto Realimove AC7000 Manuel D'utilisation

en
> UsB slot
Connect the camera to your
computer with the USB cable,
then three mode choices will be
displayed:
1. USB mode: USB mode can
be used as card reader, so
that you can copy and paste
saved videos and photos from
USB removable disk window
displayed on your computer.
2. Camera mode: the camera can
be used as a webcam once
connected to your computer.
3. Charging mode: you can charge
the camera by connecting it to
your computer or a power source
with an appropriate AC adaptor.
> Micro sd slot
The camera supports any type of
micro SD card with a capacity of up
to 64 GB. It is also recommended
to use a micro SD card whose
speed is above C10 and which
has been formatted before being
inserted into the camera.

Main FUnctions

> setting mode
Press power on/off key to select
the setting mode, then press
shutter key to enter the setting
menu. Press power on/off key to
choose the setting you want to
modify, next press Wi-Fi key to
enter its options, and finally press
shutter key to confirm your choice.
1. Video mode
2. Photo mode
3. General settings
> video mode
1. Video mode
2. Video resolution
3. Micro SD card memory left
4. Micro SD card status
5. Wi-Fi status
6. Battery capacity left
7. Time and date
> Photo mode
1. Photo mode
2. Photo resolution
3. Photo quantity left
4. Micro SD card status
5. Wi-Fi status
6. Battery capacity left
7. Time and date
4. Other settings
5. Exit