Basic Operation Of Multi-Cd Player; Track Search And Fast Forward/Reverse; Switching The Display; Disc Number Search - Pioneer KEH-P1010 Mode D'emploi

Basic Operation of Multi-CD Player

This product can control a Multi-CD player (sold separately).

Track Search and Fast Forward/Reverse

• You can select between Track Search or Fast
Forward/Reverse by pressing the 2/3 button for
a different length of time.
Disc Number Search (for 6-Disc, 12-Disc types)
• You can select discs directly with the 1 to 6 buttons. Just press the number
corresponding to the disc you want to listen to.
Note:
• When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the 1 to
6 buttons for 2 seconds or longer.
Note:
• The Multi-CD player may perform a preparatory operation, such as verifying the presence of a
disc or reading disc information, when the power is turned ON or a new disc is selected for
playback. "READY" is displayed.
• If the Multi-CD player cannot operate properly, an error message such as "ERR14" is
displayed. Refer to the Multi-CD player owner's manual.
• If there are no discs in the Multi-CD player magazine, "NODSC" is displayed.
• You can not operate the 50-Disc Type Multi-CD Player with this product.
Track Search
Fast Forward/Reverse

Switching the Display

Each press of the DISPLAY button changes the display in
the following order:
Playback mode (Play Time) = Disc and Track Number
0.5 seconds or less
Continue pressing
Play Time Indicator
8