Using Functions; Measuring Activity Data; Measuring Heart Rate; Sleep Monitoring - ADE AM 1800 FITVIGO Mode D'emploi

Selecting time format
− Select , then tap and hold
− Tap to select the desired time format and then press and hold the display to
confirm the selection.

Using functions

Measuring activity data

− Display the time and tap repeatedly. Data displayed in succession:
- Number of steps
- Calorie consumption
- Distance covered

Measuring heart rate

‚ The heart rate is automatically measured on a regular basis and
average values are transferred to FITvigo app in 10 minute intervals.
‚ The activity tracker does not recognise if it isn't worn. Hence the
automatic pulse measuring will be performed continuously. In order
to avoid faulty pulse data, please switch off your activity tracker as
soon as you stop wearing it (see „Basic operation").
To measure the heart rate manually:
− Display the time and tap repeatedly until
seconds, the measured value will be displayed on the display.

Sleep monitoring

The sleep monitoring must not be activated manually. The activity tracker
automatically detects whether you are sleeping in the period from 8 p.m. to 9 a.m.
This does not mean that you cannot sleep longer than 9 a.m., but you must go to sleep
within this timeframe for sleep monitoring to begin.
If you go to sleep outside of this time, it will not be registered.
Activity Tracker AM 1800 | 1801
.
appears on the display. After a few
Using functions
23