Carrera RC Super Mario 370501032 Instructions De Montage Et D'utilisation

Stadlbauer Marketing + Vertrieb GmbH · Rennbahn Allee 1 · 5412 Puch / Salzburg · Austria
1
3,7V
0,66 Wh LiPo
# 370501032 · # 370501033:
Contains only one model · contient un seul modèle · Contiene sólo un modelo
2
LED OFF = Charging
DEL OFF = En charge
LED OFF = Cargando
Green = Ready
Vert = Prêt
Verde = Listo
4
ON
ENGLISH
Dear customer
Congratulation! You bought a Carrera RC-helicopter which has been manu-
factured according to today´s state-of-the-art technology. As it is our constant
endeavour to develop and improve our products, we reserve the right to make
modifications, either of a technical nature or with respect to features, mate-
rials, and design, at any time, and without prior notice. For this reason, no
claims will be accepted for any slight deviations in your product from the data
and illustrations contained in these instructions. These operating and assem-
bly instructions are an integral part of the product. Non-observance of these
operating instructions and the safety instructions they contain will render the
guarantee null and void. These instructions are to be kept for future reference
and in the event that the product is passed on to a third party.
For the latest version of these operating instructions and information
on replacement and spare parts available, please visit carrera-rc.com
in the service area.
Guarantee conditions
Carrera products are technically advanced products which should be
handled with care. It is important to follow the directions given in the
operating instructions. All components have been subjected to careful
inspection (technical modifications and alterations to the model for the
purpose of product improvement are reserved).
Should any faults nevertheless occur, guarantee is assumed within the
scope of the following conditions:
In accordance with the following provisions, Stadlbauer Marketing + Vertrieb
GmbH (hereinafter referred to as "manufacturer") warrants to the endconsum-
er (hereinafter referred to as "customer") that the Carrera RC-model-helicopter
(hereinafter referred to as "product") delivered to the customer shall be free from
defects in material or workmanship for two years from the date of purchase
(guarantee period). Such defects will, at the manufacturer´s option, either be re-
paired by the manufacturer or fixed by delivering new or refurbished parts free of
charge. The warranty does not cover failure due to normal wear and tear, (e.g. to
batteries, rotor blades, cabin covering, gear wheels etc.), or damage as a result
of improper handling/misuse or unauthorised interference. Any other customer´s
claims asserted against the manufacturer, especially action for damages, shall
be excluded. The contractual and statutory rights of the customer against the
seller (supplementary performance, rescission of the contract, abatement, com-
pensation) which exist with the product not having been free from defects at the
time of the passing of risk, shall remain unaffected by this warranty.
Claims from this special warranty shall only be valid if:
• t he defect reported has not arisen by damage caused by unintended use or
misuse as specified in the instruction manual,
• the failure of the product is not due to normal wear and tear
• t he product does not show any signs resulting from repairs or other interferenc-
es carried out by workshops not having been authorised by the manufacturer,
• t he product has only been operated with accessories authorised by the man-
ufacturer and
• t he product is sent in together with the original proof of purchase (invoice / receipt)
and the completely filled in warranty card which has not been altered in any way.
Guarantee cards cannot be replaced.
Note for EU countries: Reference is hereby made to the seller's statutory
guarantee obligation, to the extent that this guarantee obligation is not restrict-
ed by the product guarantee.
Declaration of conformity
Stadlbauer Marketing + Vertrieb GmbH hereby declares that this model including
the controller conforms with the fundamental requirements of the following EC
directives: EC Directives 2009/48 and 2014/30/EU regarding electromagnetic
compatibility and the other relevant regulations of Directive 2014/53/EU (RED).
The original declaration of conformity can be requested from carrera-rc.com.
Maximum radio-frequency power transmitted <10 dBm
Frequency range: 2400 – 2483.5 MHz
Warning!
WARNING! This toy contains small parts which can be swallowed
and is therefore not suitable for children under 3 years of age.
WARNING! danger of pinching during operation! Remove
180mAh
3,7V
0,66 Wh LiPo
# 370501032
# 370501038
2x 1.5 V Micro AAA batteries
2x Accus 1, 5 V micro AAA
2x Pilas de 1,5 V Micro AAA
TM & © 2019 Nintendo. All Rights Reserved.
3
7
OFF
2x 1.5 V Micro AAA batteries
2x Accus 1, 5 V micro AAA
2x Pilas de 1,5 V Micro AAA
ON
all packaging materials and wire fastenings before handing the toy over
to the child. For information and to answer any questions, please retain
packaging, address and instructions in a safe place for future reference.
Adult supervisors note: please check that the toy has been assembled in
accordance with the instructions. Assembly should be carried out under
the supervision of an adult.
WARNING! Not suitable for children under 8 years old!
This product is not intended for use by children without s upervision of a par-
ent. Flying the helicopter requires skill and children must be trained under the
direct supervision of an adult. Read the user's information together with your
child Before the first use. Inappropriate use may result in s evere injuries and/
or damage to property.
It has to be operated with care and caution and requires both mechanical and
mental skills. The operating instructions contain notes on safety and technical
regulations as well as information on maintaining and operating the product.
It is indispensable to read these instructions thoroughly before the first usage.
Only this helps to avoid accidents with injuries and damage.
For safe use, the room where the toy is used must be sufficiently large.
Hands, hair and loose clothing, including other objects such as pens and screw-
drivers must be kept away from the propeller (rotor). Do not touch the rotating
rotor. Especially take care that your hands DO NOT get close to the rotor blades!
CAUTION: Risk of eye injuries. Do not fly near your face to avoid injuries.
As user of this product you are solely responsible for handling it safely
in order to ensure that neither you nor other persons or their property
suffer damages or are endangered.
• N ever use your model with weak remote control batteries.
• T his toy is only designed to be used in a home environment.
• CAUTION: Do not start up and fly when persons, a nimals or any ob-
structions are within the flying range of the helicopter.
• E xactly observe the instructions and warnings for this product and for any
possible additional equipment (battery charger, rechargeable batteries etc.)
being used by you.
• Should the helicopter come into contact with any living thing or solid
object, immediately return the gas control to zero, in other words the
left-hand joystick must be at the stop at the bottom of the slide!
• A void any moisture as this might do damage to the electronics.
• D o not change or modify anything on the helicopter.
If you do not agree to these terms please immediately return the complete
helicopter model in new and unused condition to the retailer.
Important information concerning Lithium Polymer rechargeable batteries
Lithium-Polymer (LiPo) rechargeable batteries are significantly more sensi-
tive than traditional alkali- or NiMH-rechargeable batteries which are normally
used with radio control units. Therefore the instructions and warnings have to
be observed in detail. In case of improper use of LiPo rechargeable batteries
there is a danger of fire. Always follow the manufacturers´ instructions if you
dispose of LiPo rechargeable batteries.
Regulations on disposal for waste electrical and electronic equipment (WEEE)
This symbol, showing refuse bins with a cross through
them, denotes that empty batteries, rechargeable batteries,
button cells, recharge a ble battery packs, equipment batter-
ies, disused electrical equipment, etc. should not be dis-
posed of in domestic refuse, as they are harmful to the environment and
health. Please help to preserve environment and health and talk to your chil-
dren about the correct disposal of used batteries and disused electrical equip-
ment. Batteries and disused electrical equipment should be handed in to the
usual collection points where they can be properly recycled.
Do not mix dissimilar battery types or employ new and used batteries together.
Empty batteries should be removed from the product. Do not recharge non-re-
chargeable batteries due to risk of explosion.
WARNING! Exhausted batteries are to be removed from the toy. Rechargea-
ble batteries should be removed from the product before charging. Only use
the batteries recommended or equivalent types.
Batteries are to be inserted with the correct polarity. Supply terminal are
not to be short-circuited. Rechargeable batteries are only to be charged
by adults.
The toy is only to be connected to Class II equipment bearing the following sym-
bol.
FCC statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
5
+
4
‒
180mAh
2 3
# 370501033
# 370501038
7
+
‒
9
AUTO
+
‒
90°
(2) t his device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's a uthority to operate the equipment.
IC statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) t his device may not cause interference, and
(2) t his device must accept any interference, including interference that may
cause undesired operation of the device.
Guidelines and warnings for the use of LiPo rechargeable batteries
• Y ou have to charge the attached 3.7 V
tery in a safe place and at a safe distance to flammable material.
• N ever leave the battery unattended while it is charging
• A fter a flight, the rechargeable battery has to cool down to the ambient air
temperature before charging it.
• Y ou must always use the corresponding LiPo charging unit (USB cable /
remote control). In case of non-compliance with these directions there is a
danger of fire resulting in a health risk and/or damage to property. NEVER
use any other battery charger.
• S hould the rechargeable battery swell or deform while discharging or re-
charging, you have to immediately stop charging or discharging the battery.
Take the battery out as quickly and carefully as possible and place it in a safe
and open area offside any inflammable material and watch it for at least 15
minutes. In case you continue charging or discharging a battery which has
already started to swell or deform there is a danger of fire! Even in case of
slight deforming or ballooning the rechargeable battery has to be taken out
of operation.
• S tore the rechargeable battery at ambient temperature in a dry place.
• Always recharge the battery immediately after use to prevent its be-
coming deep discharged. Please make sure to allow a pause of about
20 minutes between finishing the flight and recharging the battery.
Recharge the battery occasionally (suggested every 2-3 months). Fail-
ure to treat the battery as described above can lead to its becoming
defective.
• W hen transporting or temporarily storing the rechargeable battery the tem-
perature should be between 5-50°C. If possible, do not store the battery or
the model in a car and do not expose it to direct sunlight. In case the battery
is broiled it can be damaged or catch fire.
Note: If the battery voltage/output is low you will recognise that a considerable
trim and/or controlling is necessary to avoid that the helicopter starts trundling.
This usually occurs before reaching a battery voltage of 3 V and it is a good
moment to end the flight.
Contents of package
1x Helicopter
1
1x Controller
1x Display- & charging socket
1x USB charging cable
2x 1.5 V Micro AAA batteries (non-rechargeable)
Recharging the LiPo rechargeable battery
Make sure you only charge the LiPo rechargeable battery supplied with the
LiPo charging unit also supplied (USB cable and remote control). In case you
try to charge the rechargeable battery with a different LiPo battery charger or
any other battery charger, this might cause serious damages. Please carefully
read the previous chapter about warnings and guidelines on the usage of re-
chargeable batteries before proceeding.
Charging via computer:
2
• C onnect the USB charging cable with the USB port of a computer. The LED
on the USB charger cable lights green indicating that the charger unit is
correctly connected to the computer. If you plug in a helicopter with a dis-
charged battery, the LED on the USB charging cable does not light up; this
shows that the helicopter battery is being charged. The USB charging cable
and the charging socket on the helicopter are designed to make incorrect
connection impossible.
• I t takes about 30 minutes to recharge a discharged battery (but NOT a
deep-discharged one). When the battery is fully charged, the LED display on
the USB charger cable lights up green again.
Note: When supplied, the lipo-battery is already partially charged so the first
charging cycle may well take less time.
Assembly and operating instructions
Instructions de montage et d'utilisation
Instrucciones de montaje y de servicio
Made in China, Shantou
Fabriqué en Chine, Shantou
6
1
L
R
5
6
8
+
‒
L
10
5m
It is essential to follow the connection sequence given above! If you have
the charger cable only connected to the helicopter, and not to a source
of electricity, a green LED display indicates that there is still power in the
battery. The green LED display does not necessarily indicate the battery
is still adequately charged.
While charging, the power switch must be in the "OFF" position.
Inserting the batteries in the remote control
Open the battery compartment with a screwdriver and insert the batteries in
3
the remote control. Please keep in mind the correct polarity. After having
closed the compartment you can check all functions of the remote control with the
help of the power-switch on the front. With the power-switch turned ON and prop-
180 mAh LiPo r echargeable bat- er functioning, the top center LED on the remote control will light up red. When
the control LED flashes rapidly, the batteries in the controller must be changed.
Frequency bind between model and remote control
The Carrera RC helicopter and the remote control are frequency bound at
4
purchase. Should there occur any problems with the communication be-
tween the Carrera RC helicopter and the remote control at the beginning,
please carry out a new frequency bind.
• R emove the model from its presentation plinth.
• S witch on the model at the ON/OFF switch.
• T he LED in the helicopter now flashes in rhythmically-accelerating sequence.
• S witch on the controller at the ON/OFF switch. Slide the left joystick, i.e. the gas
lever, completely to the top and back down again into the zero position.The bond
will take place automatically. While connecting, the controller emits a signal tone.
• H old the model so that the rotor blades are horizontal.
• A llow the helicopter a few moments until the system is correctly initialised
and is ready for operation.
• T he control LED now lights continuously once again, indicating that the con-
nection is ended.
Checklist for flight preparation
This checklist does not replace the contents of the operating instructions. Al-
though it can be used as a quick-start-guide we strongly advise to first read the
operating instructions in detail before you proceed.
• C heck the contents of the package
• C onnect the charging unit to the source of power.
• C harge the lipo-battery as described in the section "Charging the lipo-battery".
• F it two AAA batteries in the controller, making sure their polarity is correct.
• L ook for a suitable environment for flying
• P roceed as described in
• R epeat the above points as required, if you wish to fly more helicopters at
the same time.
• C heck the control system
• S tart the helicopter from one hand. At the same time, hold the controller in
the other hand so that you can take over control of the helicopter immediately.
W ARNING! THE MODEL FLIES FORWARDS BY ITSELF AND CAN ONLY
BE CONTROLLED IN HEIGHT AND DIRECTION
• M ake yourself familiar with the control system
• T rim the helicopter as necessary as described under "Controlling the helicopter".
• T he helicopter is now ready to be flown.
• I f the helicopter displays no functions, retry the above binding procedure.
• F ly the model
• L and the model
• S witch the model off at the ON/OFF switch (3 sec.).
• A lways switch off the remote control last
Range of functions of the remote control
1. Antenna
5
2. Power switch (ON / OFF)
3. Control LED
4. Gas · tail (spinning in circles)
5. Tail (spinning in circles)
6. Trimmer for tail
7. Battery compartment
3
Description of helicopter
1. Coaxial rotor system
6
2. Socket for charging the lipo-battery
3. Display- & charging socket
4. ON-/OFF switch
1
4
ON
2
3
R
L
R
2,4m
6m
4 .